Table of Contents
Advertisement
TTL-232 Interface
Serial communication interface is usually used when connecting the engine to a host device (like PC,
POS). However, to ensure smooth communication and accuracy of data, you need to set communication
parameters (including baud rate, parity check, data bit and stop bit) to match the host device.
The serial communication interface provided by the engine is based on TTL-level signals. TTL-232 can
be used for most application architectures. For those requiring RS-232, an external conversion circuit is
needed. The conversion circuit is available only to some models.
Default serial communication parameters are listed below. Make sure all parameters match the host
requirements.
Serial Communication
Baud Rate
Parity Check
Data Bits
Stop Bits
Hardware Flow Control
5
Serial Communication
Parameter
Factory Default
Standard TTL-232
9600
None
8
1
None
Enter Setup
** Exit Setup
Advertisement
Table of Contents
