Table of Contents
Advertisement
Enter Setup
Barcode Scanning
Powered by area-imaging technology and Newland patented
fast scanning and accurate decoding. Barcodes rotated at any angle can still be read with ease. When
scanning a barcode, simply center the aiming beam or pattern projected by the EM3296 over the
barcode.
Barcode Programming
Scanning the Enter Setup barcode can enable the engine to enter the setup mode. Then you can scan a
number of programming barcodes to configure your engine. To exit the setup mode, scan the Exit Setup
barcode.
If the engine has exited the setup mode, only some special programming barcodes, such as the Enter
Setup barcode and Restore All Factory Defaults barcode, can be read.
Enter Setup
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode below to
enable or disable the transmission of programming barcode data (i.e. the characters under programming
barcode) to the Host.
Restarting the engine will automatically disable the transmisison of programming barcode data to the
Host.
Transmit Programming Barcode Data
** Exit Setup
technology, the EM3296 features
** Exit Setup
** Do Not Transmit Programming Barcode Data
2
Advertisement
Table of Contents
