Induction Hob Novy Panorama Power; Controlling The Device; Control Panel Novy Panorama Power 3 Zones (1831); Control Panel Novy Panorama Power 4 Zones (1841) - Novy Panorama Power 1831 User Manual

4 Induction hob
Novy Panorama Power
4.1 Hob control panel
4.1.1 Control panel Novy Panorama Power 3 (1831)
8 .
8 .
4.1.2 Control panel Novy Panorama Power 4 (1841)
8 .
8 .
Hob control
Switch hob on/off
Power level indication
Select cooking zone
Increase power level
Reduce power level

4.1.3 Switch on and off

Switching a cooking zone on and off
Switch on
Press and hold for 2 seconds.
Cooking zones display lights up.
Switch off
Press
.
Cooking zones display extinguishes.
Switching a cooking zone on and off
Set up
Press the cooking zone selection button.
Switch off
Press the cooking zone selection buttons
and simultaneously until the display shows
0 H
or = "hot".
If there is no control input within 20 seconds, the electronics will
return to the wait position.
8 .
8 .
8 .
Display
0 0
0
H
– 66 –

4.1.4 Pan detection

The cooking zone that has been switched on is only active
when a cooking pan is detected by the pan detection system.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use.

4.1.5 Indication of residual heat

After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H
symbol disappears when the cooking zone glass can be
handled without danger.
WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.

4.1.6 Power function

P
Power function boosts the power to the selected cooking
zone. If this function is activated, these cooking zones will be
subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off
Switch on power
Press the cooking zone selection button.
Press the button and then the
until P
Switch off Power
Press on the button
Management of maximum power:
The hob is divided into 2 separate heating groups.
symbol will flash
H
. The
Display
P
button
A1 A2
Panorama Power 3 zones (1831)