Hdmi Arc (Audio Return Channel) - JVC LT-32C655 Instruction Manual

Other Information
8

HDMI ARC (Audio Return Channel)

The ARC (Audio Return Channel) function allows you to send audio from your ARC-compliant TV to ARC-compliant audio devices
(e.g. soundbar) through a single HDMI connection.
Make sure CEC is enabled when using
an ARC-compliant device.
HDMI-ARC Connection
To enjoy the ARC function, please ensure your ARC-compliant audio devices are connected by an HDMI cable that support the
ARC function to the HDMI 1(ARC) port of your ARC-compliant TV. When correctly set up, you can use your TV remote control to
adjust the volume output (VOL +/– and MUTE) of the connected audio device.
1. Make sure your TV and ARC-compliant device are disconnected from the
main and switched off.
2. Connect your ARC-compliant device to your TV making sure you use the
HDMI1 (ARC) socket on the back of the TV. The plug in and switch on at
the mains.
Picture Settings Install and Retune
Picture
3. Press the MENU button and then press the
SETTINGS and then press the OK button.
4. Press the
Picture Settings Install and Retune
Install and Retune
Media Browser
5. Press the
select AMPLIFIER. It may take up to 15 seconds before you hear sound
from your external speaker, this is normal.
Videos Photos Music
Videos
You will now be able to use your TV remote control to adjust the volume of
your external speaker and the speaker will also switch into on/standby when
Navigate Select
OK
you switch your TV on and off.
44
LT-32C655_IB.indd 44
LAN
SPDIF VGA
Coax.OUT
SCART
Channel list Media Browser Picture
Sound
buttons to select OTHER SETTINGS then press OK.
Channel list Media Browser Picture
Media Browser
buttons to select SPEAKERS then press the
Recordings Settings Videos
Exit Navigate
MENU
LAN
SPDIF
Coax.OUT
External speaker e.g. Soundbar
Settings Install and Retune Channel list Media Browser
buttons to select the
Settings Install and Retune Channel list Media Browser
Channel list
buttons to
Photos Music Recordings Settings
Photos
Select Exit
OK MENU
VGA
SCART
ARC enabled devices MUST
be connected to the socket
marked HDMI 1 (ARC).
Picture Settings Install and Retune Channel list
Settings
Settings
Conditional Access
Language
Parental
Timers
Picture Settings Install and Retune Channel list
Recording Con guration
Date/Time
Sources
Network Settings
Other Settings
Net ix
Media Browser
Other Settings
Country : UK
Scan Encrypted Channels Yes
Blue Background O
Software upgrade V3.3.6n
Application Version Videos Photos Music V.0.3.4a Recordings
Music
Hard of Hearing O
Audio Description O
Auto TV OFF 4 Hours
Store Mode Disabled
Media Renderer Enabled
Power Up Mode Standby
Navigate Select Exit
OK MENU
CEC Enabled
Speakers Ampli er
Exit Change Value Navigate
MENU
Media Browser
Media Browser
Media Browser
Settings
17/04/2015 17:35