Honda CB650RA 2019 Owner's Manual page 93

Remove the oil filter with a filter wrench
6.
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
u
approved recycling centre.
Oil filter
Rubber seal
Apply a thin coat of engine oil to the
7.
rubber seal of a new oil filter.
Engine Oil Changing Engine Oil & Filter
u
Install the new oil filter and tighten.
8.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Install a new sealing washer onto the
9.
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Fill the crankcase with the recommended
10.
oil ( P. 74, P. 143) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
2.6 L (2.7 US qt, 2.3 Imp qt)
When changing oil only:
2.3 L (2.4 US qt, 2.0 Imp qt)
Check the oil level.
11.
Check that there are no oil leaks.
12.
P. 86
2
89