Saw Assembly; Attaching The Blade - Bosch GKS18V-25GCN Operating/Safety Instructions Manual

1600A01UV3.qxp_GKS18-25 4/27/20 8:12 AM Page 11
starting the tool accidentally.
Inserting and Releasing Battery
Pack
in the battery/charger list, included with
your tool. Using other types of batteries
may result in personal injury or property
damage.
Slide charged battery pack 19 into the
housing until the battery pack locks into
position (Fig. 2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
To remove the battery pack 19, press the
battery pack release button 26 and slide
the battery pack forward.
Press the battery pack release button 26
again and slide the battery pack completely
out of tool housing (Fig. 2).
Fig. 2
.800.544.2843
Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
Use only
batteries recommended
26
19
23
24
b
31
25
a
www.calcert.com
15
10 20
5 25
30
0

Saw Assembly

Attaching the Blade

Bosch
only blade rated 5000/min (RPM) or
greater. Using blade not designed for the
saw may result in serious personal injury
and property damage.
1. Press and hold the shaft lock button 10.
Turn blade stud 25 with provided
wrench 31 in the direction a and remove
blade stud 25 and outer washer 24.
Note: the wrench is stored near the
battery compartment (Fig. 2).
2. Make sure the saw teeth and arrow on
the blade point in the same direction as
the arrow on the lower guard.
3. Retract the lower guard all the way up
into the upper guard. While retracting
the lower guard, check operation and
condition of the LOWER GUARD
SPRING.
30
29
Use only
(184mm) blade. Use
10
13
sales@calcert.com
7-1/4"
11