Sinclair SDV5 Installation & Owner's Manual page 19

9. Rightward key "
In the query mode, when the key is pressed, the next in-service air conditioner is
selected,and its operation status data will be displayed.If it is currently on the last air
conditioner, the first one is selected and its data displays, when the key is pressed. If this key
is hold down long, the address will increase one by one.
In the setting mode, if it is in the single operation mode, when the key is pressed, the
next in-service air conditioner will be selected. If it is in the global operation mode, no effect
will result when the key is pressed.
In the main page, press the key to enter the query mode. By default, it is the first
in-service air conditioner.
10. Downward key "
In the main page, press this key "
first in-service air conditioner.
In any other time, press this key "
position air conditioner.
In the setting mode, if the global operation mode is selected, this key "
If it is on the last row, press this key "
If this key "
11. Upward key "
In the main page, press this key "
first in-service air conditioner.
In any other time, press this key "
air conditioner.
In the setting mode, if selected all the air conditioners to operate, this key "
invalid.
If it is on the first row, press this key "
corresponding air conditioner.
If you hold down this key "
12. Add key "
1) Query mode
Press this key "
If it is now in the last page, press the key "
displayed.
2) Setting operation mode
① Temperature adjusting method
② Timing on or timing off setting method
Installation & Owner's Manual
16
"
"
" is hold down long, the row will increase one by one.
"
"
", display the data of the last page.
Press this key "
If you hold down the key "
When reached the highest allowed set temperature, it can not increase.
Press this key "
If you hold down the key "
When reached the max. allowed setting time, it can not increase.
The timing seting change mode is as follow:
0 . 0 0 . 5 1 . 0
13 12 11
14 15 16
" to enter the query mode. By default, it is the
" will select the next row corresponding
" again to shift to the first row air conditioner.
" to enter the query mode. By default, it is the
" will select the previous corresponding position
" again, and shift to the last row
", the row will decrease one by one.
", the setting temperature will increase one degree.
", the setting temperature will increase one by one.
", it will select the next setting time.
", the next data will be selected one by one.
1 . 5 2 . 0 2 . 5 3 . 0
10 9 . 5 9 . 0 8 . 5
17 18 19 20
" again and the first page will be
3 . 5 4 . 0 4 . 5
8 . 0 7 . 5 7 . 0
21 22 23
" is invalid.
" is
5 . 0 5 . 5
6 . 5 6 . 0
24