M.2 Solid-State Drive - Lenovo ThinkCentre M80s User Manual

c. Remove the M.2 solid-state drive.
d. Remove the film that covers the thermal pad, if any. Then, install the M.2 solid-state drive.
e. Insert the heat sink with the M.2 solid-state drive.
f. Insert the stopper.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

M.2 solid-state drive

Prerequisite
Before you start, read Appendix A "Important safety information" on page 63 and print the following
instructions.
.
Chapter 8 CRU replacement
47