2. Remove the 2.5-inch primary storage drive from the storage converter.
3. Install the 2.5-inch primary storage drive to the storage converter.
4. On the bottom of the drive bay assembly, connect the signal cable and the power cable to the new
storage drive.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
2.5-inch secondary storage drive
1. Remove the computer cover. See "Computer cover" on page 33.
2. Remove the front bezel. See "Front bezel" on page 34.
3. Remove the optical drive. See "Optical drive" on page 35.
4. Remove the drive bay assembly. See "Drive bay assembly" on page 37.
.
Chapter 8
CRU replacement
41