Table of Contents
Advertisement
Cancelling an Incident Notification
When the device detects an incident, a message and a voice
prompt inform you that a notification will be sent to your incident
contact. A 60-second countdown timer starts when the incident
is detected, and the device sends the notification automatically
when the timer expires. If you do not want to send the
notification, you can cancel it.
Before the timer expires, select Cancel.
Disabling Incident Notifications
While incident notifications are disabled, the device does not
send an SMS notification when it detects an incident.
1
Select Settings > Driver Assistance > Incident
Notification.
2
Clear the Incident Detection SMS tick box.
Viewing Helmet Law Notifications
Helmet law and eye protection notifications may appear on your
zūmo device the first time your device acquires satellites and
when your device approaches a location with motorcycle safety
rules.
Garmin recommends that all riders wear helmets for safety.
Helmet law notifications are for reference only, are subject to
change and are not intended to be considered legal advice.
Helmet law notifications are available in the U.S. and Canada
only.
Select the notification to view more details.
Searching for Helmet Laws
You can search for helmet laws by state or province.
1
Select Apps > Helmet Guide.
2
Select a county or province.
Navigating to your destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode
(Changing the route calculation mode,
page
5) and avoidances
Areas, page
7).
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternative route
(Starting a route, page
5).
• If there are specific roads you need to use or avoid, you can
customise the route.
• You can add multiple destinations to a route.
Starting a route
1
Select Where To?, and search for a location.
2
Select a location.
3
Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternative route, select , and select a
route.
Alternative routes appear to the right of the map.
• To edit the course of the route, select
add shaping points to the route.
Navigating to your destination
NOTICE
(Avoiding Delays, Tolls and
> Edit Route, and
The device calculates a route to the location and guides you
using voice prompts and information on the map
the map, page
5). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route.
Changing the route calculation mode
1
Select Settings > Navigation > Calculation Mode.
2
Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Garmin Adventurous Routing™ to calculate
routes that prefer curvy roads.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Taking a Route Using Adventurous Routing
Your device can calculate routes that prefer bendy roads, hills
and fewer motorways. This feature can provide a more
enjoyable ride, but it may increase the time or distance to your
destination.
NOTE: this feature is not available on all device models or for all
map regions.
1
Select Settings > Navigation > Calculation Mode >
Garmin Adventurous Routing™ > Save.
2
Select Garmin Adventurous Routing™.
3
Use the Prefer Bends slider to include more or fewer curves.
4
Use the Prefer Hills slider to include more or fewer hills.
5
Use the Avoid Major Motorways slider to include more or
fewer motorways.
6
Start a route
(Starting a route, page
Starting a route by using the map
You can start a route by selecting a location from the map.
1
Select View Map.
2
Drag and zoom the map to display the area to search.
3
If necessary, select
to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4
Select an option:
• Select a location marker.
• Select a point, such as a street, junction or address
location.
5
Select Go!.
Going home
The first time you start a route home, the device prompts you to
enter your home location.
1
Select Where To? > Go Home.
2
If necessary, enter your home location.
Editing your home location
1
Select Where To? >
2
Enter your home location.
Your route on the map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
(Your route on
5).
> Set Home Location.
5
Advertisement
Table of Contents
