Garmin ZUMO 346 LMT-S Western Europe Owner's Manual page 8

Table of Contents

Advertisement

2
Use the slider bar to adjust the brightness.
Rider Awareness Features and Alerts
The rider alerts and speed limit features are for information only
and do not replace your responsibility to abide by all posted
speed limit signs and to use safe driving judgement at all times.
Garmin is not responsible for any traffic fines or citations that
you receive for failing to follow all applicable traffic laws and
signs.
Your device provides features that can help encourage safer
riding and increase efficiency, even when you are riding in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone or message for each type of alert. Not all alerts
are available in all areas.
School zone or nearby school: the device plays a tone and
displays the distance to and speed limit (if available) for an
upcoming school or school zone.
Speed limit reduction: the device plays a tone and displays the
upcoming reduced speed limit so you can be prepared to
reduce your speed.
Speed limit exceeded: the device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Level crossing: the device plays a tone and displays the
distance to an upcoming level crossing.
Animal crossing: the device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve: the device plays a tone and displays the distance to a
curve in the road.
Slower traffic: the device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature
Smartphone Link, page
Fatigue warning: the device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts
appear even when the audible alert is disabled.
1
Select Settings > Driver Assistance > Audible Rider
Alerts.
2
Select or clear the tick box next to each alert.
Red light and speed cameras
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: this feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. The device
alerts you when you approach a reported speed or red light
camera.
• Live red light and safety camera data is available as a
subscription fromGarmin Live Services using the Smartphone
Link app
(Garmin Live Services, page
• To maintain an updated database of red light and speed
camera locations, your device must have an active
subscription to download and store safety camera data. Go to
4
NOTICE
(Receiving Traffic Data Using
16).
NOTICE
13).
garmin.com/speedcameras
compatibility, or to purchase a subscription or one-time
update. You can purchase a new region or extend an existing
subscription at any time.
NOTE: in some regions, some product bundles include pre-
loaded red light and speed camera data with free lifetime
updates.
• You can use the Garmin Express
/express) to update the camera database stored on your
device. You should update your device frequently to receive
the most up-to-date camera information.
Incident Detection and Notifications
The device allows you to send your location to an emergency
contact. This is a supplementary feature and should not be
relied upon as a primary method to obtain emergency
assistance. The Smartphone Link app does not contact
emergency services on your behalf.
Your zūmo device uses built-in sensors to detect a possible
vehicle incident.
• If you set up an incident contact, the device can send an
automated text message to that contact when it detects an
incident and your vehicle stops moving. This can help alert
the contact to your situation if you are not able to call or send
a message. This feature requires a connection to
Smartphone Link and an active mobile data connection to
send a message.
• If you have not set up an incident contact, the device
automatically displays the nearest address or geographic
coordinates when it detects an incident. This feature is
helpful if you need to tell emergency personnel your location.
You can select More to view the Where Am I? page.
Setting Up an Incident Contact
Before you can set up an incident detection contact, you must
complete these tasks:
• Connect your device to Smartphone Link
phone and connecting to Smartphone Link, page
• Select Settings > Bluetooth, select your phone's name and
check that the Phone calls option is enabled.
The device must have access to the Smartphone Link app and
to your smartphone phone book during the incident contact
setup. If you do not want to use your device for hands-free
calling, you can disable the Phone calls option after the incident
contact setup is complete.
1
Select Settings > Driver Assistance > Incident
Notification > Continue.
A list of your smartphone contacts appears.
2
Select a contact, and select Next.
3
Verify the contact's phone number, and select Next.
4
Enter your name or nickname, and select Done.
5
Review the sample incident message, and select Next.
6
Follow the on-screen instructions to inform your contact that
you have added them as an incident contact.
NOTE: the incident notification message includes the name
or nickname you entered, but it is not sent from your phone
number. The message is sent using a third-party service, and
you should inform your incident contact that the incident
message will come from an unknown number.
7
Select OK.
8
Review the information, and select Save.
to check availability and
software
(garmin.com
WARNING
(Pairing with your
13).
Rider Awareness Features and Alerts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zumo 396Zumo 396 lmt-s europe

Table of Contents