Cleaning and maintenance
5.14
Replacing the DC plug fuse
d
➤ Replace the DC plug fuse as shown in fig. d, page 28.
5.15
Replacing the light PCB
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or
similarly qualified person to avoid hazard.
6
Cleaning and maintenance
!
WARNING! Electrocution hazard
Failure to obey this warning could result in death or serious injury.
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Damage hazard
• Never clean the cooling device under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
28
CFF12, CFF18, CFF20, CFF35, CFF45, CFF70DZ
3.
1.
2.
4.
EN