Step 17 Connect Drain Line - GE GDT665SMNES Installation Instructions Manual

Built-in dishwashers
Hide thumbs Also See for GDT665SMNES:
Table of Contents

Advertisement

Available languages

Available languages

CONNECT DRAIN LINE
STEP 17
The molded end of the drain hose will fit 5/8" through 1"
diameter inlet ports on the air gap, waste tee or disposer.
• Determine size of inlet port.
• Cut drain hose connector on the marked line, if required,
to fit the inlet port.
Cutting Line
1"
IMPORTANT: Do not cut corrugated
Figure Z
• If a longer drain hose is required, replace the
provided user bag drain hose with GE Appliances
service part WD24X10065, a 12' long hose which
can be connected directly to the drain loop already
attached to the unit (see Step 7). If service part hose
is not available, an additional hose with coupler, ID of
5/8" or 7/8" and no longer than 66", may be attached
to the provided user bag drain hose. Secure the
connection with hose clamp (obtain locally) to the
provided user bag drain hose.
Hose
Figure AA
Clamp
NOTES:
• DRAIN CONNECTION HEIGHT IS NOT TO EXCEED
72" ABOVE BOTTOM OF DISHWASHER.
• TOTAL DRAIN HOSE LENGTH MUST NOT
EXCEED 12 FEET FOR PROPER DRAIN
OPERATION.
Dishwasher Installation
5/8"
portion of hose
Coupler
Hose
Clamp
CONNECT DRAIN LINE
STEP 17
(CONT.)
• Connect drain line to air gap, waste tee or disposer
using the previously determined method. Secure
hose with a screw-type clamp.
Method 1 – Air gap with waste tee or disposer
Waste Tee Installation
Method 2 – "High drain loop" with waste tee or
disposer
With this method you will need the drain hose hanger
set aside in Step 1.
Fasten drain hose to underside of countertop with the
provided hanger.
Drain Hose Hanger
18"
Min.
Waste Tee Installation
IMPORTANT – When connecting drain line to
disposer, check to be sure that drain plug has been
removed. DISHWASHER WILL NOT DRAIN IF PLUG
IS LEFT IN PLACE.
Tip: Avoid unnecessary service call charges for a
no drain complaint.
Make sure excess drain hose has been pulled through
the cabinet opening. This will prevent excess hose
in the dishwasher cavity from becoming kinked or
crushed by the dishwasher.
12
Disposer Installation
Figure AB
Drain Hose Hanger
32"
Min.
18"
Min.
Disposer Installation
Figure AC
Remove
Drain
Plug
32"
Min.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdp645synfsGdt665sfndsGdt665sgnwwProfile pdt775synfs

Table of Contents