Samsung WD10N6 Series User Manual page 49

SmartThings
Category
Monitoring
Control
Notification
Q-Rator
WD10N641R2X_DC68-04055L_EN.indd 49
Checkpoint
Washing status
Smart Control
Self Check
Energy monitoring
Start/Pause/Cancel
My Favorite
Cycle completed
AddWash alarm (applicable
models only)
Remaining laundry (applicable
models only)
Laundry Recipe*
Laundry Planner*
HomeCare Wizard *
* Requires 'SmartThings', available on Android and iOS.
Registration required.
** Indicative results only.
Description
You can check the current cycle and its
options, and the remaining cycle time.
The Smart Control status is shown for the
washing machine.
Use this to check if the washing machine
operates normally.
Use this to monitor the energy
consumption status.
Select a cycle and necessary options, and
then select Start/Pause/Cancel to start an
operation, to stop temporarily, or to cancel
the current operation.
Add frequently used cycles and options to
My Favorite for later use.
Notifies you the current cycle is complete.
Notifies you of the addition of a new load.
Notifies you of any laundry left after a
cycle is complete.
You can select the fabric type, color, and
the soil level to get recommended options
and wash cycles that you can start right
away.
You can set the desired time for a wash
cycle to finish.
After you set the desired time, you will get
a recommended cycle that will end within
the time you set, and you can start or
reserve the recommended cycle.
Provides a regular report with an analysis
of the machine operation state in a user-
set frequency (every week/month).
You can use this regular report to
check your usage pattern, maintenance
requirements, and energy consumption **
for the set period of time.
English 49
2020/1/16 15:52:02