Related Manuals for Edic GALAXY 2000SX-HR
Summary of Contents for Edic GALAXY 2000SX-HR
- Page 1 GALAXY 2000SX-HR 2000IX-HR PROFESSIONAL 12 GALLON CARPET EXTRACTOR OWNER’S/OPERATOR’S MANUAL PROUDLY DESIGNED AND MANUFACTURED BY WWW.EDIC-USA.COM Revised 1-26-18...
-
Page 2: Table Of Contents
TABLE OF CONTENTS RECEIVING YOUR EQUIPMENT................... WARNINGS AND SAFETY....................3, 4 ELECTRICAL INFORMATION..................GROUNDING INSTRUCTIONS..................MAINTENANCE........................ CORD STORAGE AND SAFETY..................2000SX-HR MACHINE OVERVIEW................ACCESSORY HEATER OVERVIEW................HOW TO USE AN ACCESSORY HEATER..............CLEANING CARPET......................CLEANING UPHOLSTERY....................WIRING..........................TROUBLESHOOTING..................... UPPER BREAKDOWN 2000SX-HR/ 2000IX-HR............12, 13 LOWER BREAKDOWN 2000SX-HR................ -
Page 3: Receiving Your Equipment
Any deviation from its EDIC’s liability ceases when the carrier picks up the ship- proper use or purpose and the consequential damage ment. However, our customer service staff will be happy... -
Page 4: Electrical Information
GROUNDING INSTRUCTIONS FOR • All repairs must be done by an authorized EDIC repair station. 115VOLT: • Do not use replacement parts other than original EDIC parts. This piece of equipment must be grounded. Should an • Do not allow your spray stream to remain in one electrical malfunction occur, grounding provides a path fixed location as surface damage may occur. -
Page 5: Maintenance
MAINTENANCE: Weekly: This 2000SX-HR/2000IX-HR has been engineered and • Check and clean solution filter built to require minimum maintenance. But like any • Check for obstructions in vacuum pathways machine, it does require basic care to keep it in optimum •... -
Page 6: 2000Sx-Hr Machine Overview
2000SX-HR/ 2000IX-HR OVERVIEW 1. Handle- Used to maneuver and position the 2000SX- 6. Male twist lock pigtail- Connects to 50ft power cord. HR/2000IX-HR. Contains switch box (for switchbox, One circuit per cord. see #12). 7. Solution line Q.D.- Pressurized connection for solu- 2. -
Page 7: Accessory Heater Overview
ACCESSORY HEATER KIT 605HR/705HR OVERVIEW (PURCHASED SEPARATELY) 1. INLET QUICK DISCONNECT AND HOSE- Con- 6. HANDLE- Used to hold and transport the heater nects to machine’s outlet. 7. MOUNTING FEET- Used to engage the mounting 2. POWER SWITCH. brackets on an 2000SX-HR/2000IX-HR extractor 3. -
Page 8: How To Use An Accessory Heater
HOW TO USE AN ACCESSORY HEATER: 5. Connect your 50FT power cord to the twist lock pigtail on the heater (#4 on page 8). Plug 1. Fill the solution tank of your 2000SX-HR/2000IX- the 50ft power cord(s) to the twist lock pigtail HR extractor with sufficient water or solution for the on the back of the machine (#6 on pages 6&7) task at hand. -
Page 9: Cleaning Carpet
CLEANING CARPET: CLEANING UPHOLSTERY: 1. Using a dedicated dry vacuum, pre-vacuum the space Cleaning upholstery with success requires a good knowl- to be cleaned to remove as much dirt as possible. Do edge of the type of fabric to be worked on. Look for the not use the extractor to dry vacuum as it does not cleaning instruction label sewn on the underside of the have a dry filter. -
Page 10: Wiring
WIRING DIAGRAM HANDLE MOTOR HOUSING BLACK WHITE FOR THE FOLLOWING GALAXY AND GALAXY PRO MODELS: SX, SX-HR, IX-HR, JX-HR, KX-HR... -
Page 11: Troubleshooting
TROUBLESHOOTING ELECTRICAL SYSTEM PROBLEM SOLUTION NO ELECTRICAL POWER 1. Defective power cord. 2. House or building circuit breaker tripped POWER IS INTERMITTENT TO ONE OR ALL MO- 1. Faulty electrical cable. TORS 2. Defective switches. 3. Loose terminal or discolored terminal connections. VACUUM SYSTEM PROBLEM SOLUTION... -
Page 12: Upper Breakdown 2000Sx-Hr/ 2000Ix-Hr
11 12 13 14 15 ITEM 2000SX-HR 2000SX-HR 2000IX-HR Upper 2-6-08 UPPER... - Page 13 2000SX-HR/ 2000IX-HR 2000SX-HR Upper UPPER 2-6-08 ITEM PART NUMBER DESCRIPTION QTY. F11787 Solution Tank F11788 Recovery Tank F11791 Lid, Solution Tank E11124 Gasket, Recovery Tank 12904A Stand Pipe Assembly K11965 Elbow, 180 Deg. Float Ball K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht 10989-2A Float Ball Screen K00741 Adapter F11785 Lid, Recovery Tank...
-
Page 14: Lower Breakdown 2000Sx-Hr
20 21 2000SX-HR Base 1-25-18... - Page 15 2000SX-HR Base 1-25-18 ITEM DESCRIPTION ITEM DESCRIPTION C00297 SCREW, #8 X .25 IN, PAN A00061 3-8 BARB X 1-4 FP, BRASS HEAD J11863 HOSE, 3 IN H02564-2 LABEL, CAUTION, MOTOR HOUSING J00639 SCREW CLAMP, 1.63-2.43 IN C11165 SCREW, #8 X 1 IN PAN, BLACK F11790 HEATER, TUNNEL COVER, J00618 VACUUM HOSE, 2 IN GRAY,...
-
Page 16: Lower Breakdown 2000Ix-Hr
20 21 2000IX-HR Base 1-25-18... - Page 17 2000IX-HR Base 1-25-18 ITEM DESCRIPTION ITEM DESCRIPTION C00297 SCREW, #8 X .25 IN, PAN A00061 3-8 BARB X 1-4 FP, BRASS HEAD J11863 HOSE, 3 IN H02564-2 LABEL, CAUTION, MOTOR HOUSING J00639 SCREW CLAMP, 1.63-2.43 IN C11165 SCREW, #8 X 1 IN PAN, BLACK F11790 HEATER, TUNNEL COVER, J00618 VACUUM HOSE, 2 IN GRAY,...
-
Page 18: Warranty Info
Standard Rates, during the warranty period set forth above. This warranty excludes transportation charges unless authorized in writing by EDIC. No warranty returns for refund or credit will be permitted. In the event of a defect, these are your exclusive remedies. Warranty claims must be made in writing to EDIC prior to returning the product and no products will be accepted for repair or replacement without prior authorization by EDIC. - Page 19 (f) acts of God; or (g) modification of or any part of the product. This Limited Warranty does not cover EDIC products sold AS IS and WITH ALL FAULTS. This Limited Warranty is valid only in the United States and Canada.
-
Page 20: Notes
NOTES _________________...
Need help?
Do you have a question about the GALAXY 2000SX-HR and is the answer not in the manual?
Questions and answers