Napoleon GSS48STE Manual page 17

Conversion to LP (Propane) Gas
!
WARNING!
with the manufacturer's instructions and all applicable codes and requirements of the Authority
Having Jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation is
not proper and complete until the operation of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
!
WARNING!
• This conversion must be performed by a licensed gas fitter.
• Prior to conversion, first turn the gas off at source, then shut off the electrical power before
disconnecting the appliance.
• When conversion is completed, all connections must be leak tested before operating the appliance.
!
WARNING!
is cool. Ensure the burner is turned off. Turn the gas off at source and disconnect the appliance before
beginning conversion.
WARNING!
Your fireplace can be easily converted to LP (Propane) Gas by following these steps:
1. Remove the glass embers from the tray.
2. Remove the glass tray from the fireplace by removing the (8) screws that hold the tray in place.
3. Carefully lift the glass tray from the fireplace and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
N415-0346 OCT 07.19
This conversion kit shall be installed by a qualified service agency in accordance
To avoid the possibility of burns conversions should only be done when the appliance
Glass embers may have sharp edges wear safety glasses and gloves when handling.
17
EN
www.napoleon.com