Indicator
Name
U.S.
Starter System
Canada
Indicator
*
Turn Signal and
Hazard Warning
Indicators
High Beam Indicator
Lights On Indicator
Fog Light Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when you
●
set the power mode to ON, then goes
off.
Comes on if the starter system has a
●
problem.
The turn signal indicators blink when you
●
operate the turn signal lever.
If you press the hazard warning button,
●
both indicators and all turn signals blink
at the same time.
Comes on when the high beam
●
headlights are on.
Comes on whenever the light switch is
●
on, or in AUTO
*
when the exterior lights
are on.
Comes on when the fog lights are on.
●
*
Explanation
As a temporary measure, press and hold the
●
ENGINE START/STOP button for up to 15 seconds
while pressing the brake pedal and clutch pedal
(manual transmission only), and manually start the
engine. Have your vehicle checked by a dealer.
Does not blink or blinks rapidly - A turn signal
●
light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 374, 377
—
If you remove the key from the ignition switch*, or
●
set the power mode* to VEHICLE OFF (LOCK) while
the exterior lights are on, a chime sounds when the
driver's door is opened.
—
uuIndicatorsu
Continued
77