Honda FIT 2017 Owner's Manual page 412

uuIf a Tire Goes FlatuChanging a Flat Tire
■
Storing the Flat Tire
Wing Bolt
For full-size
Spacer
tire
Cone
For compact
spare tire
■
TPMS and the Spare Tire
U.S. models
If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator
comes on while you are driving. After driving for a few miles (kilometers), the
indicator will start blinking for a short time and then stay on, but this is normal.
Calibrate the TPMS when you replace the tire with a specified regular tire.
2 TPMS Calibration P. 336
410
Models with aluminum wheels
1. Remove the center cap.
All models
2. Place the flat tire face down in the spare tire
well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely store the wheel nut wrench, jack
handle bar and jack back in the tool case.
Store the case in the cargo area under the
cargo floor lid.
1Storing the Flat Tire
WARNING
3
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Models with wheel cover
Make sure the wire support ring is on the outer side
of the tire valve as shown.
Tire Valve
Wire Support Ring