Panasonic LUMIX DMC-FS45 Operating Instructions For Advanced Features page 44

M [Rotate Disp.]
•
Refer to P32 for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by "JEITA (Japan Electronics and
Information Technology Industries Association)".
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
[Version Disp.]
[Format]
•
Use a battery with sufficient battery power when formatting. Do not turn the camera off during
formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
~ [Language]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[ ] ([On]):
[ ] ([External Only]):
[OFF]
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted. Formatting
irretrievably deletes all the data so check the data carefully
before formatting.
Set the language displayed on the screen.
- 44 -
Basic
Rotate pictures on a TV and the LCD
display so that they are displayed
vertically.
Rotate only the picture on a TV so
that it is displayed vertically.