Panasonic LUMIX DMC-FS45 Operating Instructions For Advanced Features page 127

When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colours which are not actually present.
•
It is possible that the subject may be warped slightly, or the borders get coloured, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
Zooming stops instantaneously.
•
When using the Extra Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
Zoom does not go up to maximum magnification.
•
Is the camera set to Macro Zoom Mode?
Maximum zoom during Macro Zoom Mode is 3k digital zoom.
The file numbers are not recorded consecutively.
•
When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
The file numbers are recorded with previously used numbers.
•
If the battery was inserted or removed without first turning the camera's power off, the folder
and file numbers for the pictures taken will not be stored in the memory. When the power is
then turned back on and pictures are taken, they may be stored under file numbers which
should have been assigned to previous pictures.
When the camera is left alone, the Slide Show is suddenly displayed.
•
This is the [Auto Demo] which introduces the features of the camera. Press a button to return
the camera to the original screen.
Others
(P52)
- 127 -