Garland MULE 1162 NRQG Instruction Manual page 43

6.2.3. MOUNTING THE MUD GUARD
Place the
machine in a
vertical position
leaning on the
engine front:
Install the outer
mud guards
fixing them
with the screws
provided.
6.2.4. ASSEMBLING THE MILLING CUTTERS
Warning! The cutting edge of the blade must be in
the direction of the rotation of the milling cutters.
Install the double blade helix inside the single helix
blades fixing them with the pins and clips provided.
On the exterior, place the plant-protecting plates (3)
fixed with pins (2) and the circlip pin
6.2.5. INSTALLATION OF THE SPUR
Attach the spur (1) by passing the bolt (3) through the
chassis of the machine (2) and fix it by means of the
pin (4). Place the deep RAM (5) through the spur (1)
and insert the pin (6) at the desired height, fixing it
with the pin (7).
7
6
5
43/180
English
1
3
2
4