Adjusting The Brightness; Adjusting The Color; Adjusting The Hue (Ntsc Only); Adjusting The Dimmer - Sony MV-65ST Operating Instructions Manual

Adjust ing t he bright ness
1
Press (MENU) on the monitor repeatedly
until the "Brightness" appears.
2
Press (VOL) +/ – on the monitor
repeatedly to adjust the brightness.
The settable range is 0 to 63, and the default
setting is 30.
When 5 seconds elapse with no button
pressed, normal display resumes.
Adjust ing t he color
1
Press (MENU) on the monitor repeatedly
until the "Color" appears.
2
Press (VOL) +/ – on the monitor
repeatedly to adjust the color.
The settable range is 0 to 63, and the default
setting is 32.
When 5 seconds elapse with no button
pressed, normal display resumes.
Adjust ing t he hue (NTSC
only)
1
Press (MENU) on the monitor repeatedly
until the "Hue" appears.
2
Press (VOL) +/ – on the monitor
repeatedly to adjust the color.
The default setting is "CTR" (center).
When 5 seconds elapse with no button
pressed, normal display resumes.
Adjust ing t he dim m er
1
Press (MENU) on the monitor repeatedly
until the "Dimmer" appears.
2
Press (VOL) +/ – on the monitor
repeatedly to select "On" or "Off."
The default setting is "Off."
When 5 seconds elapse with no button
pressed, normal display resumes.
28
Downloaded from: https://www.usersmanualguide.com/
Reset t ing t he adjust m ent s
You can reset the picture, brightness, color,
hue, dimmer settings at single operation.
1
Press (MENU) on the monitor repeatedly
until the "Video Adjust" appears.
2
Press (VOL) +/ – on the monitor to reset
the settings.
When 5 seconds elapse with no button
pressed, normal display resumes.
Note
Input channel, color syst em f or t he input video
signal (NTSC/PAL), screen mode, and blue
background set t ing are not reset w hen you do t he
st eps above.
Set t ing t he screen m ode
The screen mode can be selected from the four
settings below:
Normal: An image with an aspect ratio of 4 to
3 (regular image).
Full:
An image with an aspect ratio of 4 to
3 enlarged to the left and right edges
of the screen.
Zoom:
An image with an aspect ratio of 4 to
3 enlarged to the left and right edges
of the screen, with the overflowing
parts (top and bottom) cut off to fill
the screen.
Wide:
An image with an aspect ratio of 16
to 9.
1
Press (MENU) on the monitor repeatedly
until the "M ode" appears.
2
Press (VOL) +/ – on the monitor
repeatedly to select the screen mode.
The default setting is "Full."
When 5 seconds elapse with no button
pressed, normal display resumes.