Selecting The Speaker Mode; Speaker Menu; Selecting The Downmix Mode; Downmix - Sony MV-65ST Operating Instructions Manual

Select ing t he speaker
m ode

— SPEAKER menu

Select ing t he dow nm ix m ode
— DOWNM IX
You can select the downmix mode from
"STEREO" or "LT/RT." The downmix
function is used to create stereo (2-channel)
signals from more than 5 separated digital
signals of a source.
STEREO: Select this when the connected audio
equipment does not support Dolby
Surround (Pro Logic).
LT/ RT: Select this when the connected audio
equipment supports Dolby Surround
(Pro Logic).
1
Press (SETUP) , then press < or ,
button repeatedly until "SPEAKER" menu
appears on the screen.
2
Press M or m button repeatedly to select
"DOWNM IX."
3
Press < or , button repeatedly to
select "STEREO" or "LT/ RT," then press
(ENTER) .
4
Press (SETUP) to exit the SPEAKER
menu.
Downloaded from: https://www.usersmanualguide.com/
Select ing t he digit al audio
out put m ode
You can set the mode of the audio signals
output from the OPTICAL OUTPUT
connector. "BITSTREAM" or "LPCM 48K" can
be selected.
1
Press (SETUP) , then press < or ,
button repeatedly until "AUDIO" menu
appears on the screen.
2
Press M or m button repeatedly to select
"DIGITAL OUTPUT."
3
Press < or , button repeatedly to
select "BITSTREAM ," "LPCM 48K," or
"OFF," then press (ENTER) .
4
Press (SETUP) to exit the AUDIO menu.
Notes
• When " OFF" is select ed, no signal is out put f rom
t he OPTICAL OUTPUT connect or.
• When you connect t he player and a digit al
recording device such as an M D player t hrough
an opt ical cable t o record t he CD cont ent s w it h
t hat device, t he cont ent s w ill be recorded as one
cont inuous t rack.
— AUDIO m enu
25