Read Before Operation
Preparation Before Operation
2
+
Position
–
correctly!
3
1
Remote controller
Screws
Remote
controller holder
NOTE
Notes on batteries
• When replacing the batteries, use batteries of the same type, and replace both old batteries together.
• The batteries will last for about 1 year. If the remote controller display begins to fade and the possible transmission range becomes shorter within
a year, however, replace both batteries with new, size AAA.LR03 (alkaline).
• The batteries supplied with the remote controller are for initial operation. The batteries may run out in less than 1 year.
Note on remote controller
• Do not drop the remote controller. Do not get it wet.
9
To insert the batteries
1.
Slide the front cover to take it off.
and
2.
Insert 2 dry batteries AAA.LR03 (alkaline).
3.
Replace the front cover.
To fix the remote controller holder to a wall
1.
Choose a place from where the signals reach
the unit.
2.
Fix the holder to a wall, a pillar, or similar
location with the screws supplied with the
holder.
3.
Place the remote controller in the remote
controller holder.
Turn on the circuit breaker
• After the power is turned on, the flaps of the indoor unit open and close once to set the
reference position.
Need help?
Do you have a question about the FTXM18PVMK and is the answer not in the manual?