Fiat 500L 2018 Owner's Manual page 269

SERVICING AND MAINTENANCE 267
Tire Terminology And Definitions
Term Definition
The vehicle B-Pillar is the structural member of the body located be-
B-Pillar
hind the front door.
Cold tire inflation pressure is defined as the tire pressure after the
Cold Tire Inflation Pressure
vehicle has not been driven for at least three hours, or driven less
than 1 mile (1.6 km) after sitting for a minimum of three hours. In-
flation pressure is measured in units of PSI (pounds per square inch)
or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold
Maximum Inflation Pressure
tire inflation pressure for this tire. The maximum inflation pressure is
8
molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pressure as
Recommended Cold Tire Inflation Pressure
shown on the tire placard.
A label permanently attached to the vehicle describing the vehicle's
Tire Placard
loading capacity, the original equipment tire sizes and the recom-
mended cold tire inflation pressures.