Transmitter Operation - Polycom SoundStation Premier Installation Instructions And User Manual

Full duplex conference phone and wireless microphone system
Hide thumbs Also See for SoundStation Premier:
Table of Contents

Advertisement

LAVALIER WIRELESS TRANSMITTER

Transmitter Operation

Slide the transmitter's battery cover open and place the included 9V battery into the Battery
Compartment (4), observing the correct polarity. Turn on the transmitter by pushing the Transmitter
O N / O F F
Switch (2) to the
O N
position. The "Low Battery" LED (3) will give a single quick flash.
In the case of a dead or low battery, the LED will not go on at all or will stay on continuously,
indicating a battery voltage below 7 V. If this occurs, replace with a fresh 9V battery. To preserve
battery strength, turn the transmitter off when not in use.
O N / O F F
With the transmitter
Switch (2) switched to
pocket. Attach the Microphone (5) at chest level. Do not place too close to mouth — a distance of
six inches works best. When ready to speak, turn on the microphone by pushing the Audio
O N / O F F
O N
Switch (1) to the
position.
(1) Audio On/Off Switch
(3) Low Battery LED
(5) Microphone
(4) Battery Compartment
(on the bottom)
SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User's Guide
O N
, clip the transmitter to a belt or place in a
(2) Transmitter On/Off Switch
SPECIFICATIONS
SoundStation Premier Full Duplex Conference Phone and Wireless Microphone User's Guide
Chapter 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents