Verifying system memory in setup
1
Turn on or restart your computer.
2
Perform one of the following actions after the Dell logo is displayed:
•
With keyboard — Tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu, tap F12.
3
On the left pane, select Settings > General > System Information,
The memory information is displayed on the right pane.
Testing memory using ePSA
1
Turn on or restart your computer.
2
After the Dell logo is displayed:
a
Press F12.
b Select ePSA diagnostics
The PreBoot System Assessment (ePSA) starts on your computer.
NOTE:
If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Turn off the
computer and try again.
Troubleshooting your computer
75