XTline XT102872 Original Instruction Manual page 25

ENGLAND
declare that the product
complies with the relevant EC Directives:
Technical requirements for machinery- 2006/42/EU -
Low Voltage- 2014/35/EU -
Electromagnetic compatibility- 2014/30/EU -
The technical requirements for products in terms of noise
emissions- 86/594/EHS, 2000/14/EU, 2005/88/EU -
RoHS - Restriction on the use of certain hazardous
substances in electrical and electronic equipment-
2015/863/EU -
CE mark- 93/68/EEC -
Conformity assessment carried out by an authorized
laboratory. The certificate number.
The device is not subject to the type testing
European standards
EN ISO 12100; Safety of machinery - General principles for design - Risk assessment and risk reduction, 2011-06-01
EN ISO 14118; Safety of machinery - Prevention of unexpected start-up, 2018-12-01
EN ISO 13857; Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs, 2022-09-01
EN 1005-3+A1; Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation, 2009-04-01
EN ISO 13854; Safety of machinery - Minimum gaps to avoid crushing of parts of the human body, 2021-01-01
EN ISO 14120; Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards, 2017-01-01
EN ISO 20607; Safety of machinery - Instruction handbook - General drafting principles, 2021-01-01
ISO 3864-1; Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings, 2012-12-01
ISO 3864-3; Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs, 2012-12-01
EN ISO 13850; Safety of machinery - Emergency stop function - Principles for design, 2017-01-01
EN 62321-1; Determination of certain substances in electrotechnical products - Part 1: Introduction and overview, 2014-01-01
EN 50581; Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances, 2013-06-01
EN ISO 3744; Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane, 2011-04-01
EN ISO 11200; Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions, 2015-
01-01
EN ISO 5349-1; Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements, 2002-09-01
EN ISO 5349-2; Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace, 2002-09-01
EN 60335-1 ed. 2; Household and similar electrical appliances - Safety - Part 1: General requirements, 2003-05-01
EN 60335-1 ed. 3; Household and similar electrical appliances - Safety - Part 1: General requirements, 2012-09-01
EN 60335-1; Safety of household and similar electrical appliances. Part 1: General requirements, 1997-03-01
EN 62841-1; Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements, 2016-05-01
EN 55014-1 ed. 4; Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission, 2017-10-01
EN 55014-2 ed. 2; Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard, 2017-11-01
EN IEC 55014-1 ed. 5; Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission, 2021-09-01
EN IEC 55014-2 ed. 3; Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard, 2021-09-01
EN ISO 11681-2; Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service, 2012-08-01
Declares that the (product) complies with all
relevant provisions of this Directive
Person authorized to complete the technical
documentation (according to Annex No. VII point A):
AKPTESTING - Ing. Petr Vrána, 614 00 BRNO, Proškovo nám. 21, ČESKÁ REPUBLIKA
number of technical documentation:
Identification of the person empowered to draw up
the declaration on behalf of the manufacturer or his
authorized representative and its signature.
FRANCE
déclarer que le produit
XT102872 /serial number:
est conforme aux directives communautaires
pertinentes:
Exigences techniques pour les machines- 2006/42/EU -
Low Voltage- 2014/35/EU -
compatibilité électromagnétique- 2014/30/EU -
Les exigences techniques pour les produits en termes
d'émissions sonores- 86/594/EHS, 2000/14/EU, 2005/88/EU
-
RoHS - Restriction sur l'utilisation de certaines substances
dangereuses dans les équipements électriques et
électroniques- 2015/863/EU -
marque CE- 93/68/EEC -
Évaluation de la conformité effectuée par un
laboratoire agréé. Le numéro de certificat.
Le dispositif est pas soumis à l'essai de type
normes européennes
Déclare que le (produit) est conforme à toutes les
dispositions pertinentes de la présente directive
Personne autorisée à remplir la documentation
technique (conformément à l'annexe n ° VII, point
A):
nombre de documents techniques:
BCW 99 - 6438
Identification de la personne habilitée à établir la
déclaration au nom du fabricant ou de son
mandataire et sa signature.
-----------------------------------
2022-11-30
DEUTSCHLAND
erklären, dass das Produkt
entspricht den einschlägigen EG-Richtlinien:
Technische Anforderungen für Maschinen- 2006/42/EU -
Low Voltage- 2014/35/EU -
Elektromagnetische Verträglichkeit- 2014/30/EU -
Die technischen Anforderungen an Produkte in Bezug auf
Lärmemissionen- 86/594/EHS, 2000/14/EU, 2005/88/EU -
RoHS - Beschränkung der Verwendung bestimmter
gefährlicher Stoffe in Elektro- und Elektronikgeräten-
2015/863/EU -
CE-Zeichen- 93/68/EEC -
Konformitätsbewertung durchgeführt von einem
autorisierten Labor aus. Die Zertifikat-Nummer.
Das Gerät ist nicht abhängig von der Typprüfung
Europäische Normen
Erklärt, dass das (Produkt) mit allen einschlägigen
Bestimmungen dieser Richtlinie entsprechen,
Person, die zur Vervollständigung der technischen
Dokumentation befugt ist (gemäß Anhang Nr. VII
Punkt A):
Anzahl der technischen Dokumentation:
Identifizierung der Person, die befugt ist, die
Erklärung im Namen des Herstellers oder seines
Bevollmächtigten und dessen Unterschrift zu
erstellen.