Panasonic EW1614 Operating Instructions Manual page 15

2
Throw away the remaining water.
a Remove the water tank, and
throw away the remaining
water.
• While removing the water
tank, press the main unit by
hand.
• Change the water every
time when you use the
appliance.
b Wash the water tank.
3
Remove the remaining water
from the main unit.
a Install the water tank, and
turn on the power switch
" " .
b With the nozzle facing the
basin, set the Stop/Jet
switch to " " (jet mode)
to remove the remaining
water from the main unit.
c When there is no water
coming out, set the
Stop/Jet switch to "
(stop mode), and turn off
the power switch "
a
Stop/Jet switch
b
"
Drainage
" .
outlet
4
Disconnect the power plug
from the household outlet.
5
Clean the handle.
Pull out the
nozzle while
pressing the
button.
Nozzle release
button
• Rinse the cloth of the tongue care nozzle with
running water.
• Do not bump it on the washbasin when swinging it
dry.
6
Store it after it is dry.
a Wipe off any moisture with
a towel and dry in a
well-ventilated shade.
b Store the appliance.
• Mount the handle and water
tank to the main unit, and
place the nozzle on the
nozzle stand.
• When two or more nozzles
are placed on the nozzle
stand, make sure that they
do not come in contact with
each other.
Cloth
15