Table of Contents
Advertisement
level from Lv1 (weak) to Lv5 (strong).
Note
[DRO/Auto HDR] is fixed to [Off] when the shooting mode is set to [iSweep Panorama], or
when [Multi Frame NR] or [Picture Effect] is used.
[DRO/Auto HDR] is fixed to [Off] when [Night Scene], [Night Portrait], [Hand-held
Twilight], [Anti Motion Blur], or [Fireworks] is selected in [Scene Selection]. The setting is
fixed to [D-Range Optimizer: Auto] when other modes are selected in [Scene Selection].
When shooting with [D-Range Opt.], the image may be noisy. Select the proper level by
checking the recorded image, especially when you enhance the effect.
[65] How to Use
Auto HDR
Widens the range (gradation) so that you can record from bright parts to dark parts with
correct brightness (HDR: High Dynamic Range). One image with proper exposure and one
overlaid image are recorded.
1. MENU →
2. Select the desired setting using the left/right button on the control button.
Menu item details
Auto HDR: Exposure Diff. Auto (default setting):
Corrects the exposure difference automatically.
Auto HDR: Exposure Diff. 1.0EV ― Auto HDR: Exposure Diff. 6.0EV:
Sets the exposure difference, based on the contrast of the subject. Select the optimal level
between 1.0 EV (weak) and 6.0 EV (strong).
For example, if you set the exposure value to 2.0 EV, three images will be composed with
the following exposure levels; −1.0 EV, optimal exposure and +1.0 EV.
Note
When the shooting mode is set to [Intelligent Auto], [Superior Auto], [iSweep Panorama]
or [Scene Selection], you cannot select [Auto HDR].
When [Multi Frame NR] is selected, you cannot select [Auto HDR].
You cannot start the next shot until the capture process is completed after you shoot.
You may not obtain the desired effect depending on the luminance difference of a subject
and the shooting conditions.
Using shooting functions
(Camera Settings) → [DRO/Auto HDR] → [Auto HDR].
Correcting the brightness or contrast
Advertisement
Table of Contents
