Chapter 7. Hardware Removal And Installation; Handling Static-Sensitive Devices; Service Tool Kit - Lenovo 30GS001AGE Hardware Maintenance Manual

Table of Contents

Advertisement

Chapter 7. Hardware removal and installation

This chapter provides instructions on how to remove and install hardware for your computer.

Handling static-sensitive devices

Do not open the static-protective package containing the new part until the defective part has been removed
and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage
computer components and options.
When you handle options and other computer components, take these precautions to avoid static-electricity
damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle options and other computer components carefully. Handle PCI/PCIe cards, memory
modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.
• Prevent others from touching the options and other computer components.
• Touch the static-protective package containing the part to a metal expansion-slot cover or other
unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the
package and your body before you install or replace a new part.
• When possible, remove the new part from the static-protective package, and install it directly in the
computer without setting the part down. When this is not possible, place the static-protective package on
a smooth, level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.

Service tool kit

Ensure that the following common service tool kit is prepared before you service the computer.
No.
Tool name
1
Screw driver: Philips Head 0
2
Screw driver: Philips Head 00
3
Screw driver: Philips Head 01
4
Screw driver: Philips Head 01
5
Screw driver: Philips Head 02
6
Screw driver: Torx Head T5
© Copyright Lenovo 2023
Specific
PH0
PH00
1
1, Shank length greater than 6
inches
2, Shank length greater than 6
inches
T5
Product scope
Tool type
All
Common tool
All
Common tool
All
Common tool
ThinkSation/DT
Common tool
ThinkSation/SC/DT
Common tool
IdeaPad
Common tool
45

Advertisement

Table of Contents
loading

Table of Contents