Table of Contents
Related Manuals for Black Diamond Equipment VOM205P 3801
Summary of Contents for Black Diamond Equipment VOM205P 3801
- Page 1 2.5 GALLON WET/DRY VAC Operation Manual MODEL #’s VOM205P 3801 This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious injury or death.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SECTION PAGE Warranty ....................3 Important Safety Instructions ..............4 Double Insulation Instructions ............... 6 Extension Cords ..................7 Unpacking & Checking Carton Contents ..........8 General Assembly Instructions .............. 9 Dry Vacuum Operation ................. 11 Liquid Vacuum Operation ..............12 Blower Operation ...................14 Maintenance .................. -
Page 3: Warranty
WARRANTY We take pride in producing a high quality, durable product. This Black ™ Diamond product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial, or rental use, a 90 day limited warranty will apply. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert and knowing how your vacuum works. Use this Wet/Dry Vacuum only as described in this manual. - Page 5 • Do not allow to be used as a toy. Close attention is necessary when used by or near children. • To reduce the risk of injury from accidental starting, unplug power cord before changing or cleaning filter. • Do not leave Wet/Dry Vac unattended when plugged in. Unplug from outlet when not in use and before servicing.
-
Page 6: Double Insulation Instructions
DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. -
Page 7: Extension Cords
• To reduce the risk of electric shock, unplug before cleaning or servicing. • DO NOT use without filters in place. CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS, UNPLUG BEFORE SERVICING. EXTENSION CORDS When using an extension cord with your Wet/Dry Vac refer to the following table to determine the required A.W.G. -
Page 8: Unpacking & Checking Carton Contents
UNPACKING & CHECKING CARTON CONTENTS Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. Description Qty. Vac Assembly ...........1 Wall Mounting Support ........1 Hose ..............1 Crevice Tool .............1 2-in-1 Utility Nozzle ........1... -
Page 9: General Assembly Instructions
GENERAL ASSEMBLY INSTRUCTIONS Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 25 minutes Tools Required for Assembly: Drill, Screwdriver Helpful Tools: Level... - Page 10 6. Insert the handle into the slots located on the top of the power head and secure it with the screws provided. Do not over-tighten the screws (Fig. 5). 7. For wet vacuum cleaning, install the supplied foam wet filter (Fig. 7). For installation instructions, see page 12.
-
Page 11: Dry Vacuum Operation
DRY VACUUM OPERATION DRY VACUUMING WARNING BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. -
Page 12: Liquid Vacuum Operation
LIQUID VACUUM OPERATION LIQUID VACUUMING WARNING BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. - Page 13 IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle completely in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine is fitted with a float valve that stops the suction action when the collection tank reaches its maximum capacity.
-
Page 14: Blower Operation
BLOWER OPERATION This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. CAUTION: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS. WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. -
Page 15: Maintenance
MAINTENANCE EMPTYING THE COLLECTION TANK WARNING ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK. 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Disconnect the hose from the vacuum (Fig. 2). 3. -
Page 16: Installing & Cleaning Cartridge Filter
REPAIRS Repairs for this wet/dry vacuum should be performed only by qualified service personnel using only identical replacement parts. INSTALLING & CLEANING CARTRIDGE FILTER INSTALLING REUSABLE CLOTH FILTER 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. -
Page 17: Installing & Cleaning Foam Wet Filter
INSTALLING & CLEANING FOAM WET FILTER INSTALLING FOAM WET FILTER 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Remove the power head and place in an upside down position. Follow instructions to remove the reusable cloth filter on page 13. -
Page 18: Troubleshooting
TROUBLESHOOTING WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE TROUBLESHOOTING. PROBLEM POSSIBLE CAUSE SOLUTION Check the power supply, cord, No power supply. breakers, and fuses. Unplug and check the power cord. Faulty power cord. If damaged, have it repaired by a The wet/dry vacuum will not professional. -
Page 19: Exploded View
EXPLODED VIEW... -
Page 20: Parts List
PARTS LIST Part Drawing Number Description Quantity 551012101 Handle Power Head 551012115 Float 551012116 Filter Cage Collection Tank 551012104 Vacuum Port 551012107 Wall Mount Hook Assembly 551098111 Wall Mount Bracket Assembly 551012109 Crevice Tool 551004113 Utility Nozzle 551009111 Foam Wet Filter 551012110 Reusable Cloth Filter 551012108... - Page 24 For Service or Questions: Call 877-806-9067 BLACK DIAMOND is a trademark of Mid-States Distributing, LLC. © Mid-States Distributing, LLC. Manufactured for and distributed by Mid-States Distributing, LLC. Fort Worth, TX 76137 USA.
Need help?
Do you have a question about the VOM205P 3801 and is the answer not in the manual?
Questions and answers