Subscribe to Our Youtube Channel
Related Manuals for Black Diamond Equipment VOC1210PF
Summary of Contents for Black Diamond Equipment VOC1210PF
- Page 1 12 GALLON WET/DRY VAC Operation Manual MODEL #’s VOC1210PF 3801 This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious injury or death.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SECTION PAGE Warranty ....................3 Important Safety Instructions ..............4 Double Insulation Instructions ............... 6 Extension Cords ..................7 Symbols ....................8 Unpacking & Checking Carton Contents ..........9 General Assembly Instructions ............. 10 Dry Vacuum Operation ................11 Liquid Vacuum Operation .............. -
Page 3: Warranty
WARRANTY We take pride in producing a high quality, durable product. This Black ™ Diamond product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial, or rental use, a 90 day limited warranty will apply. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. Read and understand this operator’s manual and all labels on the Wet/Dry Vacuum cleaner before operating. Safety is a combination of common sense, staying alert, and knowing how your vacuum works. Use this Wet/Dry Vacuum only as described in this manual. - Page 5 • Do not leave Wet/Dry Vac unattended when plugged in. Unplug from outlet when not in use and before servicing. • Turn off Wet/Dry Vac before unplugging. • Do not put any object into ventilation openings. Do not vacuum with any ventilation openings blocked;...
-
Page 6: Double Insulation Instructions
DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vacuum is double-insulated, eliminating the need for a separate grounding system.Use only identical replacement parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacuum before servicing. Use this Wet/Dry Vacuum as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac. -
Page 7: Extension Cords
• To reduce the risk of electric shock-unplug before cleaning or servicing. • DO NOT use without filters in place. CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS, UNPLUG BEFORE SERVICING. EXTENSION CORDS When using an extension cord with your Wet/Dry Vac refer to the following table to determine the required A.W.G. -
Page 8: Symbols
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, DANGER will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, WARNING could result in death or serious injury. -
Page 9: Unpacking & Checking Carton Contents
UNPACKING & CHECKING CARTON CONTENTS Remove all contents from the box. Remove the power head and take out any contents inside the collection tank. Check each item against the carton contents list. Carton Contents List: Description Qty. Vac Assembly ...........1 Hose ..............1 Handle Assembly ..........1 Caster Foot Assembly ........4... -
Page 10: General Assembly Instructions
GENERAL ASSEMBLY INSTRUCTIONS A Philips head screw driver is required. WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN. MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/ DRY VAC. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. -
Page 11: Dry Vacuum Operation
POLARIZED PLUG To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. - Page 12 4. Optional: For improved dust filtering, fit collection bag flange onto inlet port, taking care not to damage the bag. Dust bag sold separately (Fig. 4). 5. Place the power head back on the collection tank, aligning the top section with the latches, and snap into place (Fig. 5). OPERATING INSTRUCTIONS: DRY VACUUMING 6.
-
Page 13: Liquid Vacuum Operation
LIQUID VACUUM OPERATION LIQUID VACUUMING WARNING BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION, ENTITLED ‘IMPORTANT SAFETY INSTRUCTIONS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. - Page 14 IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle completely in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine is fitted with a float valve that stops the suction action when the collection tank reaches its maximum capacity.
-
Page 15: Blower Operation
BLOWER OPERATION This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER. KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS. WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED. -
Page 16: Maintenance
MAINTENANCE 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Disconnect the hose from the vacuum (Fig. 2). 3. Undo the latches and remove the power head from the collection tank (Fig. 3). 4. Clear all dirt or debris from the collection tank and hose (Fig. 4). 5. -
Page 17: Installing & Cleaning Cartridge Filter
INSTALLING & CLEANING CARTRIDGE FILTER INSTALLING CARTRIDGE FILTER 1. Verify that the power cord is disconnected from the outlet (Fig. 1). 2. Remove power head and place in upside down position. 3. Install the cartridge filter over the filter cage with the flat end of the filter towards the power head. -
Page 18: Installing & Cleaning Foam Wet Filter
INSTALLING & CLEANING FOAM WET FILTER INSTALLING FOAM WET FILTER 1. Verify that the power cord is disconnected from the outlet (Fig.1). 2. Remove power head and place in upside down position. Follow instructions to remove cartridge filter. 3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely covered (Fig. -
Page 19: Troubleshooting
TROUBLESHOOTING WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE TROUBLESHOOTING. PROBLEM POSSIBLE CAUSE SOLUTION Check the power supply, cord, No power supply. breakers, and fuses. Unplug and check the power cord. Faulty power cord. If damaged, have it repaired by a The wet/dry vacuum will not professional. -
Page 20: Exploded View
EXPLODED VIEW... -
Page 21: Parts List
PARTS LIST Part Drawing Number Description Quantity 551115101 Handle Assembly Power Head Assembly 551005103 Float 551005104 Filter Cage Collection Tank 551011106 Vacuum Port Assembly 551002110 Drain Cap Assembly 551006109 Caster Foot Assembly 551002113 Hose 551002116 Extension Wand 551298107 Floor Nozzle 551006111 Utility Nozzle 551006113... - Page 24 For Service or Questions: Call 877-806-9067 BLACK DIAMOND is a trademark of Mid-States Distributing, LLC. © Mid-States Distributing, LLC. Manufactured for and distributed by Mid-States Distributing, LLC. Fort Worth, TX 76137 USA.
Need help?
Do you have a question about the VOC1210PF and is the answer not in the manual?
Questions and answers