PANEL ASSEMBLY, CONTROL
① The plate assembly(Top) is disassembled.
② Pull out the drawer and unscrew 2 screws.
③ Lift the side the Control Panel Assembly and
pull it out
① Two screws is unscrewed.
② Push out PANEL ASSEMBLY,CONTROL after Push
the hook( ①, ② ) below.
③ Unscrew the screws from the lower cover.
② The cabinet cover clamp is removed by special jig for
service and the gasket is released.
③ Two screws are unscrewed.
④ Unscrew all the screws on the upper and lower sides
of the CABINET COVER.
28