LED display
Display the estimated remaining time (Hour : Minute)
to finish.
In case of abnormal operation, error indications are
displayed.
(
See troubleshooting guide.
Beep on/off
• The Beep on/off function can be set by pressing
and holding the Option and Rinse button
simultaneouly.
• To change the spin speed, turn the
Spin knob to cycle through available
options.
)
• Tub Clean course can be set by
pressing and holding Intensive
and Pre Wash button
simultaneously.
• Tub Clean is special cycle to
clean the inside of the washer.
• Select a water temperature based
on the type of load you are
washing.
• By pressing the Rinse button, the
Rinse type can be selected.
• Use this option to prevent unwanted
use of the washer. Press and hold
Crease Care and Medic Rinse button
for 3 seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power
lock the washer while it is operating.
11
Spin Selector knob
Tub Clean
Rinse, Temp. Button
Child Lock
button. You can