Table of Contents
Advertisement
Set the Time & Units
Press and hold the "SET" button, located on the back of the display, to enter
SET MODE. Once in set mode, the preference you are currently setting will
blink on the display.
To adjust the currently selected (flashing) item, press and release the "▲" or
"▼" buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
TEMPERATURE UNITS (ºF or ºC)*
*You may also select between degrees Fahrenheit (°F) or Celsius (°C)
temperature units after setup by pressing and releasing the °F/°C button,
located inside the battery compartment.
You will automatically exit SET MODE if no buttons are pressed for 8 seconds.
Enter setup mode at any time by pressing and holding the "SET" button.
Expand the System
The display features built-in sensors for measuring temperature at its location.
The display can be expanded to track additional areas by using compatible
Temperature Sensors (optional; sold separately). Add up to 3 indoor/outdoor
sensors to observe conditions in additional locations within 330 ft (100 m).
Compatible Sensors are available at: www.AcuRite.com
Compatible Sensors
Perfect for:
• Indoor and outdoor applications
Temperature Sensor
Model 06002
6
Advertisement
Table of Contents
