Set The Time & Units - AcuRite 00826 Instruction Manual

Set the Time & Units
Press the "SET" button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (flashing) item, press and release the "UP" or
"DOWN" buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET mode at any time by pressing the "SET" button.
5