Washing Clothes Using The Cycle Selector - Samsung WF8624AH User Manual

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power(
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton( ), Synthetics( ), Baby Care( ), and
Heavy Wash( ) cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton( ), Synthetics( ), Hand Wash For Wool( ), Baby Care( ), Heavy Wash( ), Quick
29'( ). The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option( ) button.
9. Press the Start/Pause(
up and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause(
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause(
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WF8622NH-02583H_EN.indd 21
) button.
) button and the wash will begin. The process indicator will light
) button to unlock the door.
) button to restart the wash.
washing a load of laundry _21
2009-02-05 ¿ÀÈÄ 3:43:06