YELLOWRIVER YR-W0384T User Manual

84-3w rgb tri led wall wash light

Advertisement

Quick Links

84*3W RGB TRI LED Wall Wash Light
Model:YD
YR-W0384T

Advertisement

Table of Contents
loading

Summary of Contents for YELLOWRIVER YR-W0384T

  • Page 1 84*3W RGB TRI LED Wall Wash Light Model:YD YR-W0384T...
  • Page 2: Table Of Contents

    Contents Section 1.Getting Started  Unpacking Safety Instruction  Section 2. Set Up Installation  Controlling Board  Machine Connection  Section 3. troubleshooting Troubleshooting  Section 4. Reference  Control Menu  DMX Protocol  Dimmer Curve  Specification Section 1.Getting Started ...
  • Page 3: Unpacking

    Unpacking 1pc Fixture 1pc User Manual Thanks for choosing our LED WALL WASH serial products. Carefully unpack the box and check the contents to ensure that all parts are present and in good conditions. If anything damaged in transit, notify the shipper immediately and keep the packing material for inspection.
  • Page 4: Section 2. Set Up

     Always disconnect from the power source before servicing or replacing fuse/lamp and be sure to replace with same fuse/lamp size and type. Cut off power before moving, repairing and cleaning the machine.  To avoid electric shock, all fixtures must be connected to circuits with a suitable earth connection.
  • Page 5 bear more than 3 times of machine weight . This machine should be installed by qualified technician. ...
  • Page 6: Controlling Board

    Controlling Board MENU DOWN ENTER Front display panel...
  • Page 7 LED Display Panel Button Switch menu function Menu Scroll upwards Scroll downwards DOWN Confirm by pressing ENTER ENTER DMX Signal Input 3 PIN XRL port for DMX512 signal input ( daisy chain); DMX signal output 3 PIN XRL Port for DMX512 signal output ( daisy chain); Power Input AC power cable port input Switch...
  • Page 8 errors still occasionally occur. Termination reduces signal errors, and therefore best practices include use of a terminator in all circumstances. If you are experiencing problems with erratic fixture behavior, especially over long signal cable runs, a terminator may help improve performance. To build your own DMX Terminator: Obtain a 120-ohm, 1/4-watt resistor, and wire it between pins 2&3 of the last fixture.
  • Page 9: Section 3. Troubleshooting

    Section 3. Troubleshooting Problem Probable Cause(s) Remedy No power to fixture Check power cables No response from Primary fuse blown Replace fuse fixture when power is applies Secondary fuse Replace fuse blown Controller Connect controller connected Incorrect addressing of the Check address setting on fixture and controller fixtures data...
  • Page 10: Section 4. Reference

    Section 4. Reference  Control Menu  DMX Protocol  Dimmer Curve  Specification Control Menu Menu Function d10-- DMX 10 channel control(need connecting controller) d.5-- DMX5 channel control(need connecting controller) r--- r000 to r255: Red from dark to bright g--- g000 to g255: Green from dark to bright b---...
  • Page 11 pr04: Lemon Green pr05:Yellow Green pr06:Yellow pr07:Tea Red pr08:Light orange pr09:Rose Red pr10:pink pr11:Pink Purple pr12:Light Purple pr13:Powder Blue pr14:Light Blue pr15:Sky Blue pr16:Light Cyan pr17:Turquoise pr18:Aqua pr19: Light Green pr20:Cool White pr21:Light Cool white pr22:Pure White pr23:Purple White pr24:Rice White pr25:Warm White F--- F000 to F255:Strobe(from slow to fast)
  • Page 12 J--- J000 to J255:Full color jump,from slow to fast S--- S000 to S255:Sound active,from slow to fast T--- on: high temperature with half power function on off :high temperature with half power function off When the temperature up to 80 ℃ , the Max. power consumption would be 50% ;...
  • Page 13 Strobe 00-01 002-043, red from dark to bright 044-085,red from bright to dark, green from dark to bright; 86-127:green from bright to dark, blue from dark to bright; 128-169:red from dark to bright, blue full bright ; 170-211: red full bright, green from dark to bright, blue full bright;...
  • Page 14 156-165:Light Cyan 166-175:Turquoise 176-185:Aqua 186-195:Light Green 196-205:Cool White 206-215:light cold white 216-225:Pure White 226-235:Purple White 236-245:Rice white 246-255:Warm White Auto & Sound 1- 10: N/A 11-40: Full colors fade, 41-70: Red, Green, Blue fade; 71-100: Red, Green, Blue fade+ full bright white 101-130: 7 colors jumping 131-160: Red, Green, Blue Color jumping 161-190, Yellow, Cyan, Purple color jumping...
  • Page 15 061-080:Dimmer Curve 3; 081-100:Dimmer Curve 4; 101-149:N/A 150-155: after 3 second, high temperature with half power function off; 156-199: N/A 200-205 : after 3 second, high temperature with half power function on; 206-255:N/A DMX512 Channel Chart:(5CH) Dimmer 0-255 RGBW Dimmer, from dark to bright Red dimmer 0-255 Red from dark to bright Green dimmer...
  • Page 16 206-255: Standard Strobe Dimmer Curves: Ramp Effect Menu Tup(ms) Tdown(ms) dr-0 Standard Dimmer Curve dr-1 1010 Dimmer Curve dr-2 1210 1320 Dimmer Curve dr-3 1600 1710 Dimmer Curve dr-4 1850 1980 Dimmer Curve...
  • Page 17: Specification

    Specification Voltage:AC110V-240V Frequency:50/60Hz Machine Power:300W Led source: 84*3W RGB TRI Color Beam Angle: 45° /25°(for option) Strobe: 0~30Hz Dimmer :1 standard +4 kinds of dimmer methods Channel:10/5CH(switchable) Control Mode:DMX512/Manual/Master-Slave/Sound active Cooling way: 1pcs temperature detect fan Over heat protection: When temperature up to 80°C, power consumption reduce to 50%; when temp. down to 65°C,will recover full power consumption to be 100% .
  • Page 18 本公司有权对此份产品说明书进行修改,恕不另行通知。 Our company reserve right to revise this user manual without notice! Innovation | Efficiency | Dedication | Harmonious...

Table of Contents