Section 1. Getting Started Unpacking Safety Instruction Unpacking 1pc Fixture 1pc User Manual 1/4pc Power switchable Cable 1/4pc Signal Cable Thanks for using our LED PAR LIGHT range. Carefully unpack the box and check the contents to ensure that all parts are present and in good conditions.
Safety Instruction For your safety,please read this user manual carefully before operation. The machine should be operated by qualified engineer! Please conserve this manual as operation guidance. If you sell this product to other user, please make sure that they also receive this user manual. ...
Section 2. Set Up Installation Controlling Board Machine Connection Installation This machine should be mounted through the screw holes of truss. Safety wire is a must to fix fixture well. Make sure truss and safety wire have strong load capacity to bear 3 times weight than fixture at least.
Page 6
Specification: Controlling Board and Front display panel Voltage:AC110V-240V Frequency:50/60Hz Rated Power:80W LED: 10WX7pcs RGBWA+UV(6 IN 1) Control:DMX512 25°(40 option) Beam angle: Channel: 11/7 channels (switchable) Control Mode: DMX/sound active/auto/ master-slave/manual Level of Protection: IP65 Stock: Clean and Dry place Running Temp.: 0°C~40°C Weight: 3.6kg Size: 22*24*19cm (excluding bracket) 1.
(7CH) DMX Protocol Machine Connection Function Description Dimmer RGBWA-UV linear dimmer, from dark to bright R Dimmer Red linear dimmer, from dark to bright G Dimmer Green linear dimmer, from dark to bright B Dimmer Blue linear dimmer, from dark to bright A Dimmer Amber linear dimmer, from dark to bright U Dimmer...
Probable cause(s) Remedy Section 4. Reference No power to fixture Check power cables No response from Control Menu Primary fuse blown Replace fuse fixture when power Secondary fuse DMX Protocol is applies Replace fuse blown Specification Controller Connect controller Control Menu connected...