If both handles are on the device, first remove the
handle on the side where the hook-and-loop fastener
is located.
10. Maintenance and storage
Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before carrying
out any cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the
device or the accessory.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packing in a dry environment, ensuring it is not weighed down by additional items.
11. What if there are problems?
Problem
Massage heads rotating
too slowly.
Massage heads do not
move.
Belt does not fit correctly. Belt length is too short.
12. Disposal
CAUTION
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
13. Technical data
Technical data:
Input
Output
Average active efficiency:
Cause
The load on the massage heads is
too great.
The device is not connected to
mains power supply.
100-240 V~, 50/60 Hz, 0.7 A
12.0 V
≥ 84.26 %
Attach the belt extension as shown in the image.
Solution
Free up massage heads.
Connect the mains adapter and switch
on the device.
Attach the belt extension to the device.
1.0 A, 12.0 W
17