Setup - Polaroid FLU-2642SA User Manual

USING THE FEATURES

Setup

SETUP
Auto programme
- All stations that can be received are stored by this method. It is recommended that you use auto
programme during installation of this set.
1.
Press the MENU button and then use
the SETUP menu.
►
2.
Press the button and then use
programme.
►
3.
Press the button to select Auto Search.
►
4.
Press the button to begin auto programming.
All receivable stations are stored.
Note :
a
. In some models, the station name is stored for stations which broadcast VPS (Video
Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station
name can be assigned to a station, the channel number will be assigned and stored as
C (V/UHF 01-69) or S (Cable 01-47), followed by a number.
b
. In Australia, if no station name can be assigned to a station, the channel number will be
assigned and stored as - - - - - followed by a number see 'Assigning a station name' section to assign the station
name.
Manual Programme Tuning
- Manual programme lets you manually tune and arrange the stations in whatever order you desire.
Also you can assign a station name with fi ve characters to each programme number.
button and then use ▲/▼ button to select the
1. Press the
MENU
2. Press the ► button and then use ▲/▼ button to select
3. Press the ► button to select
the ◄/► button or NUMBER buttons on the
4. Press the ▼ button to select
Select a TV system with the ◄/► button;
: PAL B/G, SECAM B/G (Europe / East Europe / Asia /
BG
New Zealand / M.East / Africa / Australia)
: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
I
: PAL D/K, SECAM D/K (East Europe / China / Africa /
DK
CIS)
SECAM M
M:
5. Press the ▼ button to select
the ◄/► button to select
6. Press the▼ button to select
the desired channel number directly with NUMBER
buttons (or using ◄/► button).
7. Press the ▼ button to select
station is found the search will stop.
8. Press the button to store it.
OK
9. To store another station, repeat steps from 3 to 8.
▲/▼
button to select
▲/▼
button to select Auto
Then select the desired programme number with
Program No
.
Program No.
Audio System
.
Then press
Channel Type
.
or as required.
V/UHF Cable
You can select
Channel No.
Press the ◄/► button to commence searching. If a
Manual Search
.
28
menu.
SETUP
Manual Search.
menu.