Related Manuals for Polaroid FLU-2642SA
Summary of Contents for Polaroid FLU-2642SA
- Page 1 26”/32”/37”/42” High Defi nition LCD FLU-2642SA/FLU-3242SA/FLU-3742SA/FLU-4242SA 20061017...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fi re or electric shock, do not expose this equipment to rain or moisture. RISK OF ELECTRIC SHOCK CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
- Page 3 Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc..
- Page 4 IMPORTANT SAFETY INSTRUCTIONS Do not attempt to service the equipment yourself. Opening and removing the covers may expose you to dangerous voltage or any other hazards and may void your warranty. Refer service from qualifi ed personnel. Do not place or drop any other objects on top. Do not insert anything into the ventilation holes of your equipment.Inserting any metal or fl ammable objects may result to fi re or electric shock.
- Page 5 ANTENNA CONN. ANTENNA CONNECTION EXAMPLE OF OUTDOOR ANTENNA GROUNDING If an outdoor antenna is connected, follow the precautions below: An outdoor antenna should not be located anywhere that can be in contact of overhead power lines, or any other electric light or power circuits.
- Page 6 TV company. This converter/descrambler is necessary for normal viewing scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels are used. If this is unknown, consult your cable TV company.)
- Page 7 ANTENNA CONNECTION The antenna requirements for good color TV reception are more important than those of a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
-
Page 8: Table Of Contents
Remote Control ... 13 Using your LCD TV... 16 INSTALLATION Connecting a TV Cable or an Antenna ... 17 Connecting a DVD Player ... 18 Connecting a VCR & a Video Camera Connecting a TV Box and Satellite Receiver ... 20 HDMI...22... -
Page 9: Preparation
Built-in TV tuners with PIP/POP Functionality This function allows viewing of video from two diff erent sources simultaneously. WSS (Wide Screen Scale ) Function This function can automatically convert and display any aspect ration (4:3/14:9/16:9) TV broadcast signal. PREPARATION... -
Page 10: Package Contents
AAA Batteries x 2 Power Cord These items are all you need to set up and operate the LCD TV in its basic confi guration. These items are all you need to set up and operate the LCD TV *Most devices ( VCRs, DVD player, etc.) come with the necessary cable for connection. -
Page 11: Setting Up Your Lcd Tv
Setting Up Your LCD TV Attach the Stand If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (not included). IMPORTANT : Attach the Stand to the TV with the bottom foam packaging material still attached. -
Page 12: Lcd Tv
OSD off . 4 INPUT Chooses from diff erent input signal sources. Turns the LCD TV on and into standby mode. 6 IR Infrared Receiver (IR) 7 LED The LED light indicates when the LCD TV is activated. Front View Front View... -
Page 13: Rear View
Connects to the composite A/V output jacks on your video equipment. 4 AV1 When Video/Audio of TV rear and side have been plug in the TV at the VIDEO/AUDIO(L/R) same time, TV will to priority of read the Video/Audio of TV rear. -
Page 14: Remote Control
Remote Control POWER Turns the LCD TV on and into standby mode . Mutes and restores your LCD TV sound. I-II Cycles through the TV Sound options: MONO/DUAL/STEREO SLEEP Sets the LCD TV sleep time. P.SIZE Selects from the following modes settings: 16:9 ,14:9, Zoom , Spectacle, Full, Original, 4:3. - Page 15 Remote Control INFO Displays information on the LCD TV screen such as channel and channel label. Cycles among the diff erent input signal sources: AV5 AV6 Exits the OSD menu (on-screen display), PIP/POP Mode. S.MODE Selects sound mode:Flat,Music,Movie,Speech, User. P.MODE Selscts picture mode:Standard,Mild,Game,User, Dynamic.
- Page 16 Do not use caustic cleaners( porcelain, stainless steel, toilet, or oven cleaner, etc...). You may cause damage to your remote control. Eff ective range Your remote control can be activated from up to the LCD TV 5m away, if pointed directly in front of the device.
-
Page 17: Using Your Lcd Tv
PREPARATION Using your LCD TV Always turn the LCD TV off when the LCD TV is not in use for a long period. The Power button is only used for switching the LCD TV into standby mode, it does not disconnect the device from the main voltage. -
Page 18: Installation
Basic Connection: Connecting cable or an antenna . : Use a supplied antenna cable to connect the VHF/UHF to your LCD TV. : Connect all AC power sources before turning on the power switch of the LCD TV or other connected equipments. -
Page 19: Connecting A Dvd Player
METHOD A (AV3/AV4) Use a Component cable to connect the (Y, Pb/Cb, Pr/Cr) jacks on the DVD player, to your LCD TV. Use an audio cable to connect the DVD’s audio jacks to your LCD TV. METHOD B (AV2) Use an Audio cable to connect the DVD’s audio output jacks to your LCD TV. -
Page 20: Connecting A Vcr & A Video Camera
Press the POWER button to turn on your LCD TV. To watch VCR /VIDEO CAMERA, press the SOURCE button to select AV1 or AV2 . Note: Not all cameras have the ability to connect to a TV. Please check your video camera user guide for compatibility. -
Page 21: Connecting A Tv Box And Satellite Receiver
Use an AV cable to connect the TV Cable Box’s composite output jacks to your LCD TV. Method D(AV5) : Use a VGA 15 pins cable to connect the TV Cable Box’s RGB output jacks to your LCD TV. Use an Audio cable for connecting audio. - Page 22 Connecting a TV Box and Satellite Receiver Press the POWER button to turn on your LCD TV. To watch TV via TV cable box, press the SOURCE button to select AV1, AV2, AV3, AV4, AV5 or AV6 . To watch programs via satellite receiver, press the SOURCE button repeatedly to select TV .
-
Page 23: Hdmi
INSTALLATION HDMI HDMI -This TV SET can receive the High-Defi nition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI). -This TV SET supports HDCP(High-bandwidth Digital Content Protection) Protocol for TV SET (480p, 576p, 720p, 1080i) modes. -When you connect to the output of signal source devices (DVD Player, Set Top Box or PC) which can detect HDMI/DVI signal automatically, the signal source devices will set the resolution of LCD TV automatically. -
Page 24: Using The Features
Using the Features Watching your LCD TV If the LCD TV does not display any picture,please check all the connections. LOCK Press the POWER button to turn your LCD TV on. Press the CH. button to change channel number,or use the 0-9 & -/-- buttons to select a channel. The one/ two digit numbers can be set by pressing -/-- button. -
Page 25: Wide-Screen Mode
16:9 image to fi ll the screen. You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The original image will extend the 1.25:1 image to fi ll the screen. - Page 26 Note: You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI[PC] mode only. You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV], HDMI[DTV], Component [DTV] mode only. When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fi ll the entire screen fully.
-
Page 27: Using Pip/Pop Functions
Using PIP/POP functions The PIP/POP feature allows simultaneously viewing of video from two sources. Only master source’s audio is heard. (It has image on the main and sub picture when the current source only for HDMI input.) Watching PIP - Press the PIP button to show the sub-picture. - Each press PIP button to change the current screen (as following). -
Page 28: Using The Menu
Using the Menu The MENU can be shown on the screen in the selected language. Press the MENU button then the main menu will appear on the screen. Use ▲/▼ to highlight your main menu option and then press ► to enter your selected option. -
Page 29: Setup
◄/► button or NUMBER buttons on the 4. Press the ▼ button to select Audio System Select a TV system with the ◄/► button; : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) : PAL I/II (U.K. - Page 30 3. Press the ◄/► button to fi ne tune for the best picture and sound. 4. Press the button to confi rm your selection. 5. Press the button to return to normal TV viewing. EXIT The fi nely tuned programme will be indicated by yellow number during programme selection. Assigning a Station Name 1.
- Page 31 When a programme number is skipped it means that you will be unable to select it using the CH ▲/▼ button during normal TV viewing. If you want to select the skipped programme,directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
-
Page 32: Video
Setup Area Please choose the correct TV Signal applied for your location. Video If the signal source is TV/AV1/AV2/AV3/AV4/AV5/AV6, the OSD displays: Picture Mode Standard, Mild, Game, User, Dynamic are preset and programmed for good picture quality at the factory and cannot be changed. - Page 33 Warm User Adjust the Color Adjust to select the desired skin colour option. - This function works in the following mode:TV, CVBS,S-VIDEO,COMPONENT,HDMI,VGA. - This function is not available in Black Extend /Off mode. button and then use ▲/▼ button to 1.
-
Page 34: Audio
Audio If the signal source is TV/AV1/AV2/AV3/AV4/AV5/AV6, the OSD displays: Audio Menu Options - This function lets you enjoy the best Audio without any special adjustment because the set automatically selects the appropriate Audio option based on the program content. -
Page 35: On Screen Display
Audio Stereo / Dual Reception - When a programme is selected, the sound information for the station appears after the programme number and station name disappear. On Screen Display I/II Press the button to set NICAM mode Broadcast On screen Display MONO Mono STEREO... -
Page 36: Time
If the signal source is TV/AV1/AV2/AV3/AV4/AV5/AV6, the OSD displays: Clock If current time setting is erased by a power failure, or if TV is unplugged, reset the clock. button and then use ▲/▼ button to select the TIME menu. 1. Press the MENU 2. -
Page 37: Options
Options If the signal source is TV/AV1/AV2/AV3/AV4/AV5/AV6, the OSD displays: On-Screen Menu Language Selection button and then use ▲/▼ button to select the 1. Press the MENU 2. Press the ► button and then use ▲/▼ button to select Language. -
Page 38: Screen
Screen If the signal source is TV/AV1/AV2/AV3/AV4/AV5/AV6, the OSD displays: Auto adjustment (RGB [PC] mode only) - Automatically adjust picture position and minimizes image shaking. Press the OK button or Press the ▲/▼ in the SCREEN Menu to select the Auto confi g. - Page 39 ◄/► then use button to enlarged picture mode. 4. Press the EXIT button to return to normal TV viewing. Note: Zoom In/out operates under the 16:9 aspect ratio. Zoom In/out has been operated under the 16:9, 4:3 or Original, that will automatically skip to 16:9 under the other display mode.
-
Page 40: Pip/Dw
▲/▼ button to select Input. 3. Press the ▲/▼ button to select the input source for the Main picture. 4. Press the EXIT button to return to normal TV viewing. Double windows Allows to select the Double windows to be DW1, DW2,OFF. -
Page 41: Troubleshooting
Check the interface cable between TV and antenna/ cable TV. Press the button on the remote. POWER Press the TV button on the remote, then press the SOURCE button repeatedly to select the connected video sources. Check the interface cable between TV and antenna/ cable TV. -
Page 42: Specifications
SPECIFICATIONS Model FLU-2642SA Panel System 26 inch LCD panel Display Resolution 1366 pixels(horizontal) x768 pixels (vertical) Television System PAL / SECAM Number of Colors 16.7 mil. Viewing Angle 170 /170 Brightness 500 cd/m Contrast Ratio 1000:1 Inputs/Output 2(SIDE AV& REAR AV) - Page 43 INSTALLATION Model Panel System Display Resolution 1366 pixels(horizontal) x768 pixels (vertical) Television System Number of Colors Viewing Angle Brightness Contrast Ratio Inputs/Output VIDEO input /AUDIO(L/R S-VIDEO input /AUDIO(L/R) AV3/AV4 HDTV input/AUDIO(L/R) VGA INPUT/AUDIO(L/R) HDMI INPUT VIDEO OUT Speaker Out Power Source(MAX) Dimension( W x D x H) Weight(Net) NOTE:...
- Page 44 Display Mode For the display modes listed below, the screen image has been optimized during manufacture. RGB/DVI Mode Dot X Line Horizontal Frequency(kHz) 640X480 640X480 640X480 640X480 800X600 800X600 800X600 800X600 1024X768 1024X768 1024X768 1280X1024 Vertical Frequency(Hz) 31.469 59.94 37.861 72.80 37.500 75.00...