Toshiba MMK-UP0271HP-AE Owner's Manual page 22

High power operation
High power (Hi POWER)
• The Hi POWER (high power operation) mode
automatically controls room temperature, air ow
and operation mode so that the room is quickly
cooled in summer and warmed in winter.
Setting Hi POWER mode
1
Hi POWER button
Press the Hi POWER button after starting any
operation. At the same time, the "Hi POWER" mark
on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi POWER button
Press the Hi POWER button once again. At the same
time, the "Hi POWER" mark on the remote controller
goes out.
• The Hi POWER mode cannot be activated in the
DRY and FAN ONLY operation and when
the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
21-EN
OM_1121250207_EN.indd 21
1130550206_EN.indd 22 1130550206_EN.indd 22
SWING FAN
FIX
1
ECO Hi POWER
CAUTION
ECO operation
• The ECO mode provides ECO operating status
by automatically control room temperature to
save energy (except in DRY and FAN ONLY
mode).
1
Setting ECO mode
1
ECO button
Press the ECO button after starting any operation.
At the same time, the ECO mark is indicated.
Cancelling ECO mode
1
ECO button
Press the ECO button once again.
At the same time, the ECO mark on the remote
controller disappears.
CAUTION
The ECO mode cannot be activated in the
and FAN ONLY operation.
NOTE
Cooling operation; the set temperature will increase
automatically 1 degree/hour for 2 hours (maximum
2 degrees increase).
- 21 -
Owner's Manual
ECO
SWING FAN
FIX
ECO Hi POWER
DRY
6/8/2562 BE 14:52
2/11/2565 BE 15:49 2/11/2565 BE 15:49
OM_11