Table of Contents
Advertisement
Names and functions of
indications on wireless remote
controller
Display
All indications, except for clock time indication, are
indicated by pressing the START/STOP
button.
9
6
7
• In the illustration, all indications are indicated for
explanation.
During operation, only the relevant indications
will be indicated on the remote controller.
1
Transmission mark
This transmission mark (
remote controller transmits signals to the indoor unit.
2
Mode display
Indicates the current operation mode.
(A : Auto,
3
Temperature display
Indicates the temperature setting (17°C to 30°C).
When you set the operating mode to
no temperature setting is indicated.
4
FAN speed display
Indicates the selected fan speed. AUTO or one of ve
fan speed levels (LOW
MED
Indicates
5
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
6
Hi POWER display
Indicates when the high power operation starts.
Press the Hi POWER button to start and press it
again to stop the operation.
7
ECO display
Indicated during the ECO operation.
BE 14:52
OM_1121250207_EN.indd 14
1130550206_EN.indd 15
1130550206_EN.indd 15
1
3
2
ECO
) indicates when the
: Cool,
: Dry,
: Heat,
, LOW
+
+
, HIGH
when the operating mode is
8
P (PRESET) display
Indicated when memorizing the preferred operation
mode or when it has been memorized.
Also, this icon is indicated when the memorized
preferred operation is displayed.
9
Indicated during the OFF timer operation that
automatically adjusts the room temperature and
the fan speed. Each time you press the COMFORT
SLEEP button, the display changes in the sequence
10
of 1h, 3h, 5h, and 9h.
10
Swing display
8
Indicated during the swinging operation where the
horizontal louver automatically moves up and down.
5
NOTE
4
When both wired remote controller and wireless
remote controller are used, display on the screen
of wireless remote controller may differ from the
actual operation in some cases.
Preparation and check before use
1. Loading Batteries
• Remove the battery
cover.
• Insert 2 new batteries
(R03 [AAA]) following
: Fan only)
the (+) and (-)
positions.
2. Removing Batteries
• Remove the battery
: Fan only,
cover.
• Remove the 2 used
batteries.
, MED
,
Batteries
) can be indicated.
• To replace the batteries, use two new batteries
: Dry.
(R03 [AAA]).
• In normal use, the batteries will last about one
year.
• Replace the batteries if there is no receiving
beep from the indoor unit or when the air
conditioner cannot be operated using the remote
controller.
• To avoid malfunctions by battery leakage,
remove the batteries when not using the remote
controller for more than one month.
• Please dispose of the used batteries according to
the local regulation.
- 14 -
Owner's Manual
(COMFORT SLEEP) display
14-EN
6/8/2562 BE 14:52
2/11/2565 BE 15:49
2/11/2565 BE 15:49
Advertisement
Table of Contents
