Setting Up The Monitor; Installation - Philips EVNIA 24M1N3200Z User Manual

2. Setting up the
monitor

2.1 Installation

1 Package contents
24M1N3200Z
24M1N3200ZS
24M1N3200VS 24M1N3200V
24M1N3200VL 24M1N3200ZA
24M1N3200VA
AC/DC Adapter
*Different according to region
Note
24M1N3200Z/24M1N3200ZS:
Use only AC/DC adapter model: Philips
ADPC1925.
24M1N3200V/24M1N3200VL/
24M1N3200VA/24M1N3200VS/
24M1N3200ZA:
Use only AC/DC adapter model: Philips
ADPC1945EX.
Quick start
Register your product and get support at www.philips.com/welcome
*Earphone-Hang
*HDMI *DP
2 Install the base
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
24M1N3200Z
24M1N3200V
24M1N3200ZS
24M1N3200ZA
24M1N3200VS
24M1N3200VA
24M1N3200VL
(2) Use your fingers to tighten the
(3) Gently attach the stand to the
24M1N3200Z/24M1N3200V/
24M1N3200ZA/24M1N3200VA
24M1N3200ZS/24M1N3200VS/
24M1N3200VL
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
5
stand.
screw located at the bottom of
the base.
VESA mount area until the latch
locks the stand.