the drive letter assigned to the CD-ROM drive of your computer.)
S
t
e
p
4
.
T
e
s
t
i
n
g
S
t
e
p
4
.
T
e
s
t
i
n
g
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Open the scanner's document cover and place a book, head toward the
scanner button panel, on the scanner glass.
2. Gently close the document cover.
3. Press the [Book Pilot] button on your scanner.
4. If the image with Book Pilot Window shows up, your scanner is working
properly.
Please refer to Book Pilot on-line help for further information about
using Book Pilot.
Information
Software Setup Troubleshooting
Carefully review the steps outlined in this guide and the Quick Guide that
accompanied your scanner.
If you are still having problems, please check that:
You have 800MB of free space on your hard disk drive.
The scanner is plugged in and has power.
You are using the USB cable supplied with the scanner.
The square end of the USB cable is plugged into the rear of the scanner.
The rectangular end of the USB cable is plugged into the back of your
computer.
t
h
e
S
c
a
n
n
e
r
t
h
e
S
c
a
n
n
e
r
10