Scanner Lock - Plustek OpticBook 3600 User Manual

Appearance
No Display

Scanner Lock

Your scanner is designed with three different lock statuses to protect the optical
parts. To ensure the scanner working properly, you have to choose an appropriate
lock status according to the situation.
Auto Lock is for scanning on a smooth surface. The scanner will be locked
automatically when the lock head is not pushed in. This lock status is recommended for
general use.
Always unlock is for scanning on a surface that is not firm, unstable or too soft.
Furthermore, if you place your scanner on a long-term position, you can also keep your
scanner lock in this status.
If you use this lock status, ensure to relock the scanner before any
movement to prevent damage of your scanner.
Warning
Always lock can hold the scanning head in place during transportation and
traveling. The scanner will be kept in disable status.
The program has been successfully launched and the scanner
is connected with the computer, ready to scan mages.
The scanner is not connected with the computer. Or, the
scanner power is not switched on.
You have chosen to terminate the program, no matter the
scanner is connected or disconnected with the computer.
16
Status