Plustek OpticBook 3600 User Manual page 12

d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the Next button.
e. Click on the Next button in the window that appears.
f. During the process of the installation, a message "Digital Signature required"
might be prompted.
installation without any misgiving at your scanner functioning. Afterwards,
please skip to Step 6.
4. For Windows XP
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select Install the software automatically (recommended) and click on the
Next button.
c. Click on the Next button in the window that appears. Afterwards, please skip to
Step 6.
5. For Windows Vista
a. Select Locate and install driver software (recommended) when the "Found
New Hardware" window is displayed.
b. Click on the Continue button when the "User Account Control" dialog pops up.
c. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive when the system prompts you "Insert the disc that came with
your USB Scanner", and click on the Next button.
d. During the process of the installation, a message "Windows can't verify the
publisher of this driver software" might be prompted. Please ignore it, and click
on Install this driver software anyway to continue the installation without any
misgiving at your scanner functioning.
6. When the system completes the installation, click on the Finish button.
7. Follow the on-screen instructions to install all software that your new USB scanner
requires.
8. After the software is installed, close all open applications and click on the Finish
button to restart your computer.
If the scanner installation is not started and displayed automatically on
the screen, click Start, select Run and type in D:\Install (where D: is
Information
Please ignore it, and click on Yes to continue the
9