Chipset Configuration - Gigabyte G293-S42 User Manual

5-2-9 Chipset Configuration

Parameter
Restore on AC Power Loss
Skip Above 4G Decoding for VGA
P2P Bridge IO Size
P2P Performance for GPU
SATA HDD Security Frozen
Chassis Opened Warning
(Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.
Description
Defines the power state to resume to after a system shutdown that is
due to an interruption in AC power. When set to Last State, the system
will return to the active power state prior to shutdown. When set to
(Note)
Power Off, the system remains off after power shutdown.
Options available: Last State, Power Off, Power On, Unspecified. The
default setting depends on the BMC setting.
Enable/Disable 64bit capable devices to be decoded in Skip Above 4G
Address VGA Space.
Options available: Enabled, Disabled. Default setting is Disabled.
Specifies P2P Bridge IO aligned to the size.
Options available: 0x100, 0x150, 0x1000. Default setting is 0x1000.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable this item to send freeze lock command to SATA HHD.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the chassis intrusion alert function.
Options available: Enabled, Disabled, Clear. Default setting is
Disabled.
BIOS Setup
- 76 -